解决方法来自:点击打开链接
我在编译内核时候出现错误如下:
如果在终端执行 make menuconfig ,显示错误:
Your display is too small to run Menuconfig!
It must be at least 19 lines by 80 columns.
make[1]: *** [menuconfig] Error 1
make: *** [menuconfig] Error 2
表示终端窗口太小。解决办法可以是把终端窗口适当的调大(或是直接最大化)就行了。
相关推荐
The idf.py monitor target uses the idf_monitor tool to display serial output from the ESP32. idf_monitor also has a range of features to decode crash output and interact with the device. Check the ...
这是一个关于linux2.4内核配置的文档 make menuconfig
make[1]: `include/asm-arm/mach-types.h' is up to date. CHK include/linux/utsrelease.h CC arch/arm/kernel/asm-offsets.s cc1: error: invalid option `abi=aapcs-linux' make[1]: *** [arch/arm/kernel/asm-...
自己整理的openwrt编译make menuconfig配置 使用说明: make menuconfig直接按照表格一选择即可,选项按颜色设定 白色字体项可以不选,为附加功能,按需选择 黑色字体项在配置里部分项默认选中,带标注的按需...
在linux系统上编译各种资源时均需要进行配置,而对make menuconfig的具体过程了解清楚有助于知识系统的学习
和linux內核编译一样的menuconfig 模板, 可以在终端显示图形界面的配置.
linux内核配置make-menuconfig菜单详解.doc
linux内核添加新驱动实例,并提供menuconfig
把buildroot里的make menuconfig那部分ncurses抠出来,自己 使用make menuconfig配置自己的工程,可以用来玩玩
2.6内核编译配置选项简介--介绍make_menuconfig中的每个选项含义.
Openwrt学习笔记-通用固件-make-menuconfig配置,Openwrt学习笔记-通用固件
linux menuconig de 详细配置。。
uclinux2.4移植到s3c44b0上时make menuconfig的配置选项,此选项在第一次make menuconfig时生成,有默认的一些选项。已经做了符合目标板的修改,问题不大了。特此上传
openwrt config简答介绍
uclinux make menuconfig 的使用--trace 输出的原始数据,
###Install OpenWRT 交叉编译 SDK 和 qpid-proton 所需的库:配置构建选项: $cd openwrt/trunk$make menuconfig![menuconfig] (./menuconfig.png) 在menuconfig中,选择你的构建平台,选择build the OpenW
linux内核配置makemenuconfig菜单详解.pdf
使用到make menuconfig配置工具的时候会依赖这个包,安装的时候选项记得写./configure --enable-mconf
Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip,...